About us

Contact us

You Are Here:Home>Maintenance

Maintenance

Massage bathtub cleaning and maintenance

Daily cleaning, massage cylinder is suitable for general liquid detergent and soft cloth, not available with acetone or chlorine detergent ingredients; if the cylinder surface with sealing tape glue stains not clear, can dip in with soft cloth gently wipe the trace gas.

Two, if there is a scratch on the surface of the cylinder, with 1500# water scrub dipped in water to polish, and then coated with toothpaste, with a soft cloth polishing can be bright and clean as new.

Three, the cylinder surface scale available with light acid detergent, such as lemon juice, vinegar and other micro heating with a soft cloth to wipe.

Four, water heater and nozzle, such as hair and other debris clogging, should be promptly cleaned, remember to keep the flow.

Five, chrome plated parts do not need to often wipe (not and organic solvent chemical items contact). Note: with acidic glass glue, gas will damage the surface of the plating parts.

Six, do not use rough utensils, containing chemical solvents or cleaning agents to wipe the surface of the cylinder body particles.

Seven, do not use sharp tools, percussion, scratching surface of the cylinder body; the cylinder surface water contact also should not let the cigarette butts or above 100 DEG C.

Eight, after each use, should try to discharge the water in the water pipe.

Nine, hydraulic massage device for cleaning with hot water of 40 DEG C to fill the bathtub, according to the dosage of 2 grams per liter detergent, start the hydraulic massage for about 5 minutes, stop the pump drainage, and then fill cold water again start hydraulic massage for 5 minutes, drain the water and dry the tub.

Ten, often check the power lines, switches, contacts are mice, insects, ants and other damage, to avoid accidents, resulting in unnecessary losses.

Eleven, often check the water supply pipes and drainage pipes are broken, and the use of a discount to the inconvenience, check the drainage channel is smooth.

Steam shower room cleaning and maintenance

Daily cleaning, steam shower room is suitable for general liquid detergent and soft cloth, not available with acetone or chlorine detergent ingredients; if the sticky surface real body sealing tape glue stains not clear, can dip in with soft cloth gently wipe off the trace gas.

Two, if there are scratches on the surface of the body surface, with 1500# water scrub paper dipped in water to rub, and then coated with toothpaste, with a soft cloth polishing can be bright and clean as new.

Three, the real body surface scale available with light acid detergent, such as lemon juice, vinegar and other micro heating with a soft cloth to wipe.

Four, the steam nozzle, disinfection gas outlet parts such as hair and other debris clogging, should be promptly cleaned, remember to keep the flow.

Five, gold plating, chrome plating to wipe (not to be exposed to organic solvents and chemicals). Note: with acidic glass glue, gas will damage the surface of the plating parts.

Cleaning agent graze the surface of a room body six, do not use rough utensils, containing chemical solvents or particles.

Seven, do not use sharp tools, percussion, real body surface characterization.

Eight, suggested that the steam engine after 20 thermal cycles, cleaning steam generator once. When cleaning, the 10 to 1.5 grams of citric acid to 1.7 ~ 5 liters of warm water diluted by the hose into the generator, static 8 to 12 hours after the power supply, press the key to open the steam, so that the cleaning agent gasification.

Nine, after each use, should be discharged into the steam generator water, in order to extend the life of the steam generator.

Ten, frequent leakage test, leakage protection switch leakage performance to ensure the integrity of the (according to the leakage protection plug on the test button) leakage switch will trip, which proves its good, you can press the reset button switch on the power supply.

Eleven, often check the power lines, switches, contacts are mice, insects, ants damage, to avoid accidents, resulting in unnecessary losses.

Twelve, often check the water supply pipes and drainage pipes are broken, and the use of a discount to the inconvenience, check the drainage channel is smooth.

Company profile | Bathtub series | Message | Contact us

Copyright:Wuxi Nover sanitary ware building material Co., Ltd.
Su ICP for the preparation of 05019780 -1
Address:Wuxi City Lake Road No. 157 C District -6
Tel:+86(510)85102888 85129788
Fax:+86(510)85129688

ABOUT US

The United States owned Nofer Sanitary Ware Co. Ltd. is located in Jiangsu city of Wuxi Province Lake Lake, covers an area of more than 100 acres. Currently employs more than 300 people. Formed by two factories in three branches. Company was founded in June 1996, the main production and sale of computer steam room, shower room, massage cylinder and other sanitary ware. Since the company's first products on the market since, with its design simple and elegant, beautiful and unique features, excellent quality, in the domestic large and medium-sized city established sales network won the trust of our customers and export sales to Europe, America, Southeast Asia and other countries and regions. >>More